2015 SCM TF135 EP4 Class shaper w/HSK tool holder
The TF 135 EP 4 Class combines old world quality with new age technology. The “EASY” four axes programmer controls the powered sectioned table, spindle height, infeed fence, and outfeed fence and has the capacity to store up to 300 programs. Spindle speed is also regulated from the controller, and the “FAST” sectioned table eliminates the need for insert rings.
PROGRAMMABLE FENCES and SPINDLE SPEED
The “EASY” programmer controls four axes - the spindle height, the sectioned table, the entire fence position in relation to the tool diameter, and the position of the infeed fence in relation to how much material is being removed. With a memory capacity of 300 programs, it easy to set up the TF135 EP 4 Class for those profiles you use frequently. Or, you can use the manual function for precise control of those one-off jobs. The “EASY” easy programmer provides a digital readout for the positioning of all axes in addition to the The spindle speed, which is powered by inverter with speed ranges from 900 to 12,000 RPM, is also controlled through the programmer.
“FAST” SECTIONED TABLE
With a sectioned table there is no longer any wasted time searching for that correct table ring to fit your cutterhead. This table design has been used on our Superset moulders and the technology has been transferred to our shapers. The table is simply moved into the best position to fit your cutter, and is electronic/programmable from the controller.
The flex fence allows the fence to swing out of the way for quicker setups. This system is guaranteed to remain square every time.
HSK 63 B SPINDLES
For quick change over and consistent tooling position, you can't beat the HSK 63 B automatic spindle release system in the SCM Class machines. Eliminate hassles with stacked tooling and just drop in the next profile. With a flip of a switch it locks permanently into place.
Monoblock technology is used in the design and fabrication of this base. The solid, welded base undergoes a treatment call normalization which stabilizes the metal and assures exact tolerances. All machine mechanisms are mounted, aligned, and referenced to the base. This design is vastly superior to frames that are bolted together and have no true reference point.
LARGE ELECTRO SPINDLE
One thing that can degrade the quality of finish from a shaper is the vibration transmitted from the spindle to the cutter. Minimizing vibration is even more critical when cutting tall profiles to using stacked tooling. SCMI ensures maximum quality in its shapers by using very large spindle assemblies whereby the increased mass of the spindle absorbs vibrations and eliminates whipping action at the top of the spindle.
All SCMI shaper spindles are completely assembled and high speed balanced as one complete unit which further ensures vibration free performance.
MANUAL FEEDER SUPPORT
The TF135 EP4 Class HSK comes standard with the manual feeder
support bar. This feature makes it easy to set up and maintain the
settings for your powerfeeder. A mechanical digital readout allows
you to reference these settings easily.
4 Axes “EASY” controller for infeed / outfeed fence, “FAST” sectioned table, and spindle height with
the ability to store up to 300 independent programs
Electronic inverter control of spindle speed from controller with slow enough speed for sanding applications
HSK 63B spindles 1 1/4 Inch diameter
Upper mobile control panel
Flex: swing support fence with electronic adjustment of fence
Fast: sectional table to adjust for tool diameter
Cross support mount for feeder with readout
Pneumatic device for release of HSK 63B spindle
Reverse rotation switch
LED digital readout of spindle height, infeed / outfeed fence, and “Fast” table position, & speed on controller
Magnetic starter with overload protection
Low tension circuit (110 v by transformer)
13 HP Electro Spindle
1200 x 730mm (47.2” X 28.7”)
920mm ( 36" )
Working Height of Spindle (under the nut)
140mm ( 5.5” )
Max. Tool Diameter w/ Profile Fence
Max. Tool Dia. Retractable Under Table
320mm x 85mm ( 12” x 3.75” )
Spindle Speeds (rpm)
900 to 12,000
Dust Outlet on Fence and Rear Base
120 mm each
Overall Dimensions (L,W,H)
48” x 29” x 41”
Crated Dimensions (L,W,H)
52” x 43” x 45”
35 amps @ 230 volts
680 CFM x 2
© 1957 - 2021 Akins Machinery. All rights reserved.