Minimax SC 4E Sliding Table Saw 

Our brand new sliding table saw, the Elite series has proven itself in American cabinet shops for many years. This machine boasts a full 8.5’ stroke, and features normally found on much more expensive machines, for a fraction of the cost. See for yourself why the Minimax SC 4E 8.5 foot machine stands in a class of its own.

CAST IRON BLADE GROUP 

The Minimax SC 4E has a massive cast iron blade group, this large design lends extra stability to the main blade and scoring blade. The cast iron blade group tilts on two trunnions to lessen degradation over time, and the main blade and scoring blade raise independently of each other. 

CAST IRON RIP FENCE KNUCKLE 

The Minimax SC 4E has a thick, cast-iron knuckle, to which the extruded aluminum rip fence is attached. It rides on a large steel round bar, and is locked in placed with a cam design for maximum rigidity. It micro-adjusts into place via a rack and pinion design. 

SCORING 

The Minimax SC 4E comes standard with scoring. This allows you to not only accurately cut panels, but you can cleanly cut them too. This is important when cutting particle board, melamine, laminated panels, or anything else to which you want to apply some type of edgebanding. If you are cutting solid wood, simply drop it below the table surface independently of the main blade. A 12” main blade capacity is featured without having to remove the scoring blade. The scoring is belt driven from the main motor.

SEPARATE MITRE GAUGE 

The Minimax SC 4E comes with a separate mitre gauge. This way, for mitre cuts, the operator can keep the main crosscut fence at 90° and use the separate mitre gauge to do the angled cuts, saving time when mitering small panels.

EXTENSION TABLE AND SLIDER LOCK 

The Minimax SC 4E features an additional table on the slider to assist in supporting larger panels. Also featured is the sliding table lock which allows the slider to be locked when pulled away from the blade. This makes loading panels much easier.

STANDARD EQUIPMENT 

Solid cast iron saw unit with double support trunions

Aluminum sliding table and rail with hardened steel guide-ways

European-style rip fence with cam lock, micro-adjustable 

Round steel guide bar for rip fence

Telescoping crosscut fence with two adjustable flip stops

Eccentric panel clamp

2-position sliding table lock

Table extension on saw out-feed

Scoring blade (Adjusted Independently of Main Blade)

¾” dado capacity

Tool set & manual 

“CSA”-rated electrical components, including cables

TECHNICAL SPECIFICATIONS