The Belfab downdraft table is ergonomic and energy efficient and it offers easy maintenance. The downdraft table from Belfab is available in three different sizes. The table is mounted on wheels and it can be easily moved around your shop. This downdraft table is perfect for light to medium duty woodworking applications such as sanding and finishing.

The Belfab downdraft table is ergonomic and energy efficient and it offers easy maintenance. The downdraft table from Belfab is available in three different sizes. The table is mounted on wheels and it can be easily moved around your shop. This downdraft table is perfect for light to medium duty woodworking applications such as sanding and finishing.

The Belfab downdraft table is ergonomic and energy efficient and it offers easy maintenance. The downdraft table from Belfab is available in three different sizes. The table is mounted on wheels and it can be easily moved around your shop. This downdraft table is perfect for light to medium duty woodworking applications such as sanding and finishing.

The DW model is engineered as a compact and high efficiency modular dust collector solution, offering a height of less than 11’. This unit is designed to operate as either a dedicated “stand alone”, or main dust collector within a woodworking facility.

MODULAR FILTER TECHNOLOGY

The DW open system design integrates BELFAB modular filter technology. This feature makes it possible to increase filtration surface cost effectively, with the introduction of additional filter modules.

This expandable filter module capability makes it possible to offer large filtration surfaces, capable of developing an air to cloth ratio better than 6:1. This feature makes it ideal for dust collection application involving moderate to large dust volume in either coarse or fine material.

The BA-1800is powered by a dual inlet blower providing 1800 CFM. The blower is a direct-drive system, requiring low maintenance. The modular feature of theBA-1800allows different permutations of filters arrangement. With the possibility to add-on to the standard pre filter and pleated filter, theBA-1800can be configured for each specific application. Possible filters that can be added include carbon filter, bag filer and even HEPA filter for extreme filtration efficiency. TheBA-1800Cis designed to be suspended from the ceiling, while theBA-1800Gis to be installed on the ground with the discharge going towards the ceiling, to improve air circulation. TheBA-1800cleans ambient air, improving the working environment in the shop.

The JDW model is an industrial small capacity dust collector system equipped with a 5 HP blower generating over 2500 CFM, available in single or three phases electrical connection.

This collector is designed to collect dust particles ranging from coarse to mixed sizes, generated by wood machines operating in intermittent or continuous fashions and producing moderate to heavy dust loads.

The JDW unit is generally recommended for applications involving one or two machines in a small shop environment or in larger facilities where there is a need for an industrial “stand alone solution”.

The JLW model is an industrial small capacity dust collector system equipped with a 2 or 3 HP blower generating over 1000 CFM or 1400 CFM, available in single or three phases electrical connection.

This collector is designed to collect dust particles ranging from coarse to mixed sizes, generated by wood machines operating in intermittent or continuous fashions and producing moderate to heavy dust loads.

The JLW unit is generally recommended for applications involving one or two machines in a small shop environment or in larger facilities where there is a need for an industrial

The JNBM-OP model is an industrial small capacity dust collector system equipped with a 7.5 HP blower generating over 3500 CFM, available in single or three phases electrical connection.

This collector is designed to collect dust particles ranging from coarse to mixed sizes, generated by wood machines operating in intermittent or continuous fashions and producing moderate to heavy dust loads.

The JNBM-OP unit is generally recommended for applications involving one or two machines in a small shop environment or in larger facilities where there is a need for an industrial “stand alone solution”.

The LW model is engineered as a compact and high efficiency modular dust collector solution, offering a height of less than 11’. This unit is designed to operate as either a dedicated “stand alone”, or main dust collector within a woodworking facility.

MODULAR FILTER TECHNOLOGY

The LW open system design integrates BELFAB modular filter technology. This feature makes it possible to increase filtration surface cost effectively, with the introduction of additional filter modules. This expandable filter module capability makes it possible to offer large filtration surfaces, capable of developing an air to cloth ratio better than 6:1. This feature makes it ideal for dust collection application involving moderate to large dust volume in either coarse or fine material.

The NBM dust collector is designed to filter volumes of air varying from 2500 CFM to 12000 CFM.

MODULAR FILTER TECHNOLOGY

The NBM system design integrates BELFAB modular filter technology. This feature makes it possible to increase filtration surface cost effectively, with the introduction of additional filter modules.

This expandable filter module capability makes it possible to offer large filtration surfaces, capable of developing an air to cloth ratio better than 6:1. This feature makes it ideal for dust collection application involving moderate to large dust volume in either coarse or fine material.

The Belfab NBM-OP dust collection system is perfect for the collection of wood dust. The NBM-OP is an enclosure-less bag type filtration unit engineered as a compact and high efficiency system, offering a height of less than 11’. This dust collector is designed to operate as either a dedicated “stand alone”, or main dust collector within a woodworking facility.

MODULAR FILTER TECHNOLOGY

The NBM open system design integrates BELFAB modular filter technology. This feature makes it possible to increase filtration surface cost effectively, with the introduction of additional filter modules.

This expandable filter module capability makes it possible to offer large filtration surfaces, capable of developing an air to cloth ratio better than 6:1. This feature makes it ideal for dust collection applications involving moderate to large dust volume in either coarse or fine material.

The BELFAB SBM dust collector has been engineered to handle dust volume requirements ranging from 5,000 to 18,000 CFM.