New England's #1 Woodworking Sales and Service Professionals
SCM K560ERT automatic edgebander
Call for Price
Manufacturer
SCM
Product Name
SCM K560ERT automatic edgebander
Model
K560ERT
Serial #
AH/119477
Year
2016
Condition
Used
Hits
362
Status
In Stock

2016 SCM MODEL K 560ERT SINGLE SIDED EDGEBANDER

Automatic single sided edgebander designed to be used for edgebanding straight vertical profiles with coiled material (veneer and PVC) and with strips (high-pressure laminate and solid wood) with a maximum thickness of 8mm.

MACHINE BASE

The machine base is made of a tubular steel structure and is designed to assure maximum stability and accuracy.

TOP PRESSURE BEAM

All operating units raise and lower simultaneously when the pressure beam is adjusted. No adjustment is required for the glue roller when changing panel thickness. The pressure beam has two rows of staggered pressure rollers with steel bearings. 

CAPACITIES AND SPEED

  • Edgebanding thickness: .4mm - 6mm (.016-1/4”) ?
  • Guillotine capacity: 3mm ?   
  • Feed speed: 40/60 ft/min.
  • Panel height: 3/8” min – 2 1/8” max
  • Minimum panel length: 5 1/2”
  • Minimum panel width: 2 3/8”
  • Minimum distance between panels: 20” 

GLUE STATION

Teflon coated glue pot to facilitate glue changeover. Warm up time is approximately eight to ten minutes. The unit is also equipped with a quick disconnect plug for changing from one pot to another.

PRESSURE SECTION

There are a total of three pressure rollers for pressing the banding to the workpiece edge. The first roller is powered,and it is also Teflon coated to prevent the banding material from slipping. The two idle rollers have opposing one-degree tilt to provide extra pressure along the top and bottom edge. The machine comes standard with an automatic strip magazine. Comes standard with a mechanical digital readout for the positioning of the pressure section. The glue pot is Teflon coated and has a 5.5lb. capacity. Comes equipped with a quick change feature that allows the operator to remove the glue pot in less than two minutes.

TOUCH 7 CONTROLLER

The K 560 comes equipped with the new "Touch 7" controller.  This controller features a 7" touch screen display. Capable of storing 60 programs. Color graphic display of all the working units. Tracks production information, diagnostic information and monitors maintenance schedules. Choose mm's or inches, as well as 5 different languages. Swivels 270 degrees and tilts for easy access. 

ANTI-ADHESIVE

The machine comes equipped with an anti adhesive unit positioned prior to the pre milling unit. It prevents the build up of glue on the top and bottom of the panel. The unit comes with two independent nozzles and a tank of anti adhesive liquid. 

ADUSTABLE INFEED FENCE

The infeed fence is manually adjustable with a mechanical digital readout for determining stock removal.

RT-V PRE-MILLING STATION:

To rectify/clean panels already sized and squared before the edge is applied. The unit is composed of two high frequency motors (2.0hp) with jumping action controlled through the PLC.  The cutting heads are adjustable vertically. Diamond cutters are standard with 49mm height. 

K-SEL 2” END TRIMMING STATION

This unit is composed of two independent .50 hp motors mounted on THK guides. End trim utilizes a draw cut system for reduced blade projection on thick panels. The unit comes standard with automatic tilting of the unit from the control panel with two preset positions. 

R/K EDGE TRIMMING STATION   

This unit is composed of two independent .7 hp motors operating at 12,000 rpm. It comes standard with THREE position pneumatics, this allows the operator to go from thin tape, to 3mm pvc, to solid wood, through the control panel. All adjustments are carried out with mechanical digital readouts. The unit has top and bottom copy wheels and side copy shoes. The motors have quick release plugs to facilitate tooling changes.

"ROUND-X” CORNER ROUNDING UNIT: 

Two independent .50hp motors that slide on THK guides ensuring the highest quality finish. Unit is designed to work as an additional set of trimmers for rounding the top/bottom as well as the front/rear corners of work piece with 3mm PVC edges. The unit is equipped with front and lateral copying devices and pneumatic blowers to clean the panel. Dust shrouds surround the cutter and travel with the unit as it trims. The unit can go from thin tape to 3mm PVC, through the controller, with no manual adjustments by the operator.  

RAS / K PROFILE SCRAPING STATION

The profile scraping station designed to remove knife marks from thick PVC.

The unit is equipped with pneumatic in/out positioning through the controller. It has a large diameter horizontal copy wheel and side copy wheel device with digital indicators. It features a quick knife replacement system and comes with 3mm knives. 

RC-V GLUE SCRAPING UNIT

The unit eliminates any excess glue to help improve the quality of the glue joint. It comes standard with double copy wheels on the top and bottom of the panel, air blowers are standard to help keep the knives clean, the off fall is collected in the collection bin and it is pneumatically positioned through the controller. 

SP-V BUFFING UNIT

The buffing unit has two .25 hp motors. It can also be tilted up to 12 degrees to provide a softer, more refined edge finish.

ACOUSTICAL SAFETY ENCLOSURE

All working units are enclosed under an acoustical safety hood to reduce noise and prevent accidents. The hood has a safety microswitch which prevents the machine from operating when the hood is open. 

CENTRALIZED DUST EXTRACTION

Machine comes with two 3” ports for the premilling station, two 3” ports for the end trim station, two 3” ports for the top and bottom trim station, two 2” ports for corner rounding station and one 3” port for the 3mm collection bin for extraction.

TECHNICAL SPECIFICATIONS:

 

Glue Pot Unit:

 

   Heating Time

Approx. 8-10 min.

   Glue Capacity

5.5 lbs.

Pre-Milling Unit:

 

   Horsepower

2.0 HP (2)

   RPM

19,000 RPM

   Height

49mm

   Max. Stock Removal

Adjustable

End Cutting Trimming Station:

 

   Horsepower

.25 HP (2)

   RPM

12,000 RPM

   Tilting

2 preset positions

Edge Trimming Unit:

 

   Horsepower

.70 HP (2)

   RPM

12,000 RPM

   Cutting Tools

Combination Cutters

Corner Rounding Unit:

 

   Horsepower

.50 HP (2)

   RPM

12,000 RPM

   Cutting Tools

3mm Radius

Scraping Unit:

 

   Knife Radius

3mm

Buffing Unit:

 

   Horsepower

.25 HP (2)

   RPM

2,800 RPM

   Diameter/Bore

152mm/17mm

Feed Motor Horsepower

2 HP

Feed Speed

40/60 FPM

Frequency Converter

200 Hz

Dust Hood Diameter

Per Drawing

Pneumatic Operating Pressure

90 PSI

 

 

Related Equipment
SCM K800FRT automatic edgebander

Details >

SCM K560ERT automatic edgebander

Details >

Biesse Lato 23S edgebander

Details >

SCM S2000FRT automatic edgebander

Details >

Related Accessories
No item found
CALL FOR PRICE.